novaforme
Feb 4 2005, 06:23 PM
| | Have you ever overclocked your computer? if so how far did you go and what type of cooling did you use? |
Reply
CodeName_88
Feb 4 2005, 06:38 PM
Mah, but someone actually overclocked his PC to 6 Ghz, used some sort of chemical to cool it...... lol, it was so funny, but it worked!!
Reply
novaforme
Feb 4 2005, 06:42 PM
there was a company that would sell you a P4 that was clocked to 5. something Ghz, they used an air condition system that was built into the computer, crazy
Reply
Galahad
Feb 5 2005, 12:04 AM
I clocked my comp, but only by 20%.. from 2.0 to 2.6 GHz... and believe it or not, I use box cooler, that shipped with the original 2.0 cpu  Of course, the case stays open at all times, and two additional 80 mm fans are installed, one of them blowing on the heat sink, and one blowing under the hard drive... On 100% utilization, cpu temp doesn't go over 50 degrees Celsius... As for eXtreme clocking... ir rulez!  I enjoyed watching a movie where this guy, from Tom's Hardware Guide, clocked P4 to 5.2GHz, and cooled it with liquid nitrogen and chipset was cooled with some sort of compressor... and the cpu temp was about -190 degrees Celsius I just love this kind of things, i just wish I knew mora about hardware, so I could do some of that eXtreme stuff...
Reply
novaforme
Feb 5 2005, 12:38 AM
ok thats not bad for a box cooler, i got mine from 2.0 to 2.9 with a thermaltake volcano 7, what are you running AMD or Intel? and i saw that on tomshardware too that was crazy, that would be cool to do if i wasnt affraid of turning my hands into glass :-) do you keep yours clocked that high Galahad or just once?
Reply
rejected
Feb 5 2005, 08:37 AM
I'm using overclocking ram, they come with little fans built on them so they stay cool.
Reply
karlo
Feb 5 2005, 10:18 AM
I overclocked 700 Mhz to 800 Mhz with just 1 fan... The result, the motherboard was damaged! Can't read my two memory. And, when I open my pc, I hear a siren!
Reply
finaldesign
Feb 5 2005, 11:02 AM
QUOTE(karlo @ Feb 5 2005, 11:18 AM) I overclocked 700 Mhz to 800 Mhz with just 1 fan... The result, the motherboard was damaged! Can't read my two memory. And, when I open my pc, I hear a siren! do not overclock if you do not understand the risks....
Reply
karlo
Feb 5 2005, 11:47 AM
QUOTE(finaldesign @ Feb 5 2005, 07:02 PM) do not overclock if you do not understand the risks.... That's why I have learned my lesson! I will never ever ever overclock unless I have many coolers!
Reply
Galahad
Feb 5 2005, 11:11 PM
QUOTE(novaforme @ Feb 5 2005, 12:38 AM) ok thats not bad for a box cooler, i got mine from 2.0 to 2.9 with a thermaltake volcano 7, what are you running AMD or Intel? and i saw that on tomshardware too that was crazy, that would be cool to do if i wasnt affraid of turning my hands into glass :-) do you keep yours clocked that high Galahad or just once? I actualy clocked the machine about 5 hours after I bought it and it's runing at that speed since... that's about... two years now... And most current thing... my system is up for 540h 5m 50s and it's WinXP Pro SP1... and believe me... apache/mysql are constantly on-off, on-off... UnrealIRCd the same... playing NFSU2, and other games... SETI@Home always running... I'm just trying to see how long the system will be stable Oh, yes... I'm runing Intel Celeron
Reply
Thunder
Nov 26 2005, 12:41 AM
I have never overclocked my computer but overclocking the graphics card is easier. I dont risk overclocking the computer its to much money to risk. But i take risks on the graphics card even though its pretty expensive but not as my as my Dell Dimension XPS.
Reply
fusionx
Nov 25 2005, 01:26 PM
I have heard about it and want to try it but im a bit scared. My PC is 2ghz so i would like to get it to something like 3 or so. Then again im not going to try. 
Reply
boogames
Nov 24 2005, 01:03 AM
I was just wondering how exactly do you overclock your cpu i tried once on a old pc i think it was an amd i cut some pins physically and then set it into the motherboard turned it on and bam my pc blow up and there was fire and smoke and everything it recked everything and the only thing i could save was my ram the hardrive got burnt the video card melt and well the case was not a cas no more and the cpu was gone lmfao but beforew i try again i want to make sure how to do it so i don't reck my pc this time lol
Reply
cardude
Nov 22 2005, 10:16 PM
I do a little, but I don't really need to overclock. My processor runs at 2.85 GHz. That isn't much of an increase from 2.8 GHz. It doesn't run any hotter. Sometimes, I will put it at 2.86 GHz, but I don't "try" to overclock. My computer is fan cooled, not liquid cooled. My Intel would probably heat up too much if I tried to overclock. I would buy a new processor that was faster to get more speed, not overclock.
Reply
Amezis
Nov 22 2005, 08:09 PM
After some quick searching I found this thread anyway: http://www.trap17.com/forums/overclocking-t28191.htmlThat's the answer to my question 
Reply
Recent Queries:--
over clocking a processor at 5-10 ghz - 930.10 hr back. (1)
-
overclocking - 1007.18 hr back. (1)
Similar Topics
Keywords : overclocking, overcloked, comp
- How Do A 3 Monitor Comp Work
i have seen in a video somewhere (5)
Overclocking Xd
(5) Have any of you heard of overclocking? or the process of increasing the clock speed of a certain
processor? It can be done to virtually anything but it is most common in computer processors and
graphics cards. I have a 3.0E HT Prescott running at 3.85ghz stable with reasonable temperatures
for about a year now.....
Free Text Messagers (comp To Phone)
text messages from comp to phone for free (6) Yeah as the name implies, feel free to simply post all of your free text messager stumble sites you
find. Anyways, this site *below* allows you to well...send a text message to any phone that can
recieve messages for free, yes that's right no charge, it's a decent deal if I say so
myself, of course there is always a limit to what you can or cannot type and how much of the actual
message you can recieve to the phone to like all limitations now a days.
http://www.freetextmessager.com/ Well enjoy. ~ Aeara. /smile.gif" style="vertical-align:middle"
emoid=":)" b....
Looking At Building New Comp, Down To Video Card
(6) I've got everything ready to build my new computer, except the video card, and mobo. I was
looking at going dual video card, and I was wondering what you guys thing is better: Dual ATI 2900XT
512mb with Crossfire, or Dual Nvidia 8800GTX in SLI? I'm mostly going to be playing source
engine games. The rest of the comp specs are: QUOTE Intel Core 2 Duo E6600 2.4 Vista Home
Premium Samsung 500gb SATA HDD Gigabyte Aurora Case Silverstone Zeus 650w PS 2 Lite-On LiteScribe
DVD+/-RW SATA ....
Transparent Boxes, Plastic, Rigid Plastic And Acetate Boxes Manufacturers
manufacturers of PVC films, PVC Tubes, PVC Zippers, Cooling Tower Comp (0) Transparent boxes, plastic, rigid plastic and acetate boxes Manufacturers Trim Pack was
launched in the year 1998 by young, energetic and enthusiastic enterpreneur blended with the years
of experience of the senior promoters. Trim pack is one of the Bhargawa group of companies, which
have been in existence since 1960. The range of the products manufactured by the Bhargawa Group
includes Garment Accessories like Collar Bones, Bands, Butterflies, Buttons ans so on.The group also
produces PVC films, PVC Tubes, PVC Zippers, Cooling Tower Components and reprocessed ....
Overclocking My Processor N Motherboard
Did some crazy overclocking here (3) ok, I know that I have quite a number of real crazy overclockings before. like clocking a 2.4GHz
Pentium IV processor to rum at 3.6 GHz (Woooow). That is a kool 50% overclocking and guess what?
Everything was still normalk even after the crazy overclocking....Can you believe that. I do
respect the Intel Northbridge chipsets as they really allow you to do some very kool clocking to
your processor, RAM and Northbridge. I have used a number of Pentium IV class processors and
motherboards (6 pairs to be exact) within a quite a very short interval of time (within the past 1 ....
Computer Admin Login With Lost Password?
Hack my own comp. (15) Im trying to fix some things on my acount but, i hava to be able to log into my Admin. acount. my
dad had the comp. before me and he forget the password to get into the acount. how do i hack into my
own computer to get the password, or is there any way of defragging my comp. without being a admin?....
Case Mods, Overclocking, Etc....
need someone with some experience (1) Recently we have working on tutorials for case mods, overclocking hardware, tweaks, and other
similar things. We need more people to help add these to our site. If you have any knowledge in
these please head over to http://www.pcgarageworld.com oh yeah, i know we don't have a header
image... it got deleted on accident so i have to re-upload it which i will do later today and also
reviews are welcome....
How They Teach Comp Sci
the @ss-backwards way (5) I don't know if this is a problem for anyone else, anywhere else, but what really grinds my
gears is when a university tries to 'teach' computer science using books and powerpoint
slides. Bloody hell! Most programmers don't learn by reading a book of keywords and tiny
"hello world" problems. And we certainly don't learn how the delicate interactions of code
segments... uh.. interact... from powerpoint slides summerizing what we just read in the friggen
book! I learn from example! I want to be in a classroom with a computer terminal in....
Comp Reboots Before Windows Starts Up
(6) The only way I can get to the desktop is in Safemode, which I am in now. I start my computer up
normally and when it gets to the Windows loading screen, about after 5 seconds it reboots and then
it says there is a problem with it. (I'll try and get the exact message but it's really,
really long.) And it gives me the options to start in Safemode, Start Windows normally, or start
Windows with my last good recent thing. I choose the last one (start Windows w/ last good thing) and
it starts up, I see the desktop and everything until everything loads up then all the i....
Overclocking
How-To on Overclocking (17) Guide to overclocking, version 1 This guide was written for http://optamumpc.com , which is now
located at http://area51.neverstudy.com . Anyways overclocking is the process of pushing your
hardware beyond factory specs. In doing this, nor I or your hardware manufacturers (AMD, Intel, Ati,
Nvidia, and motherboard companies) take any responsibility for damage done. Overclocking past a
certain point will void your warranty (except if you do it this other way for Nvidia cards, which I
suggest googling). 1. The Basics -What is Overclocking? Overclocking is pushing ha....
Computer Jokes
nerdy comp jokes! (5) There are 10 kinds of people in the world the ones who understand binary, and the ones who dont!
/tongue.gif' border='0' style='vertical-align:middle' alt='tongue.gif' /> ....
Cpu Overclocking
Power failure on some components (6) I overclocked my CPU, from 2.0 to 2.6 GHz... I have a 300W power supply, that works pretty well, it
even compensates for some short power glitches... Now, to the core of the problem... My CPU
multiplier is fixed to 20 (it's a Celeron processor), and I raised my FSB from 100, to 130... I
have two HDD's, and a combo optical drive... I have added a small fan on my GFX card, and added
4 more fans inside a case, to cool the machine... Now, if I raise FSB speed to 135 or above, if some
heavy CPU usage is required, my second HDD will shut down, and in most cases, eve....
Work That "voodoo"
Crazy comp I got to use for 2 weeks. (1) Here is my review of the Voodoo F510. At the computer store I used to work at they let me take it
home for about 2 weeks. I had to write a review on it so here it is. Work That Voodoo Voodoo PC
has come out with a new Voodoo F-Class, F510. This Calgary based company specializes in high-end
custom PC’s. Basically, it’s for anyone that wants to get everything out of there PC without over
clocking. Though this PC is often for a hardcore gamer who has an extra $6000 lying around.
The F510 utilizes Intel’s Canterwood technology. Intel’s Canterwood technology boost....
Overclocking Amd Processors
(6) i consider this a great site....if you're gonna buy a new Athlon 64 CPU and going to overclock
it.... http://www.ocklub.net/AMD_64_Socket_939_OC.htm ....
Installing PHP on my comp
(29) Hey, i need some help with installing PHP on my comp so i can build and edit nuke sites. I used the
windows installer and installed it but i dont know what to do know.....
Overclocking Tools
(3) here... if you want to overclock your system this programs will help you.. they are all free;)
http://download.ocklub.net/ ....
My Newwww Comp
(9) nothing much but just to say what i have on my new comp.. call it bragging call it w/e u want... my
comp is a compaq: AMD athlon XP 3200+ 2.20 GHz 512MB of ram compaq fp17 flat panel monitor nVIDIA
GeForce FX 5200 n the speakers... its like these 2 altec lansing ones that came with a big
rectangle box one... they are pretty good but they mess up if u have ur cellphone on ur desk and
somebody call/text msg u. on bhd 50 players in the game ping goes to 20-170 n it runs
SMOOOOOOOOOOOOOOTHLy....
Overclocking
(2) ..if you ever overclocked your system... post results here.. ..i will go first.. i have:
Athlon 64 Winchester 3500+ on Asus A8V Deluxe with 512 MB ram..an a stock coller... Standard
clock ratio... 200 x 11 ...2200MhZ ... @ 2750 MhZ 250 x 11 1,625 V Asus A8V @ BIOS 1009,003
it can go much higher..but i have to buy better cooling and a better RAM (this one stinks..
/smile.gif' border='0' style='vertical-align:middle' alt='smile.gif' /> ) so what about you.......
Overclocking On A Laptop?
advice needed (4) I've got a Presario 2568 with a Radeon 9200 shared graphics card. now in the BIOS it says i can
set the card to 128MB, but the manual and tech support say that that is not an option. as far as
tehy're concerned , it isn't a bios option. but since it is, i would like to know whether or
not it would do any good to set it at 128 instead of the default 64. would that count as
overclocking, and overheat the chip? or would it simply be a waste of 64 mb memory?....
Can Someone Help Me With Some Hardware Topics
I want idea and tech for comp hardware (3) Hi everyone. Since most of you are good at computers I though I could use some help for my seminar
anyway being a part of this community I though let's make use of the knowlege and idea's of
people here. I am doing a seminar on PC hardware. Anything about hardware will do. I want to do it
nicely. Since there are over two thousand members here. I thought if all of you could lend me a
little of you idea's it would be great. I alone can do it. But with everyone's help it might
be a lot better. And if you can give me some information also it would be good....
The Overclocking Guide
(5) What is Overclocking Overclocking when done right will Increases your PC's performance by large
amount. It can take a $150 chip and give it the same speed as a $300+ chip. Also many
pre-made computer such as Dell,HP,GateWay and many other do not let you overclock. Some Rules
Don't overclock unless you accept that you may damage your equipment. Always take small steps
when increasing voltages, bus speeds and multipliers. Never change BIOS settings if you're
unsure of the results or what function they perform. Never assume that you'll get t....
What Kind Of Comp Do You Have?
(-1)
What Kind Of Comp Do You Have?
(40) I have and HP invent with windows xp proffessional, how about you>? -oh darn, i put hp invent on
there twice.. just use the top one, please.....
My brother was broken my comp!!
(1) My brother is stupid. U can see him at www.skf.xp.pl....
Creating a Compiler
The Nightmare of a Comp Science Students (6) I got this assignment from my college: To create a working Compiler or Interpreter You need to
design your own Language And build the compiler using Java or preferably C. This is one scary
nightmare...dang....I wish I can just wake me up... but I can't this is not a nightmare. T_T
Btw, does anyone here has any experience on creating compiler or interpreter using C? I am designing
a language which is the combination of C and PHP. And I need help.....
Personal Comp Vs Pre-made
which do you do or prefer? (49) So what do you prefer? I actually just have a premade computer. But I have been thinking of building
my own or at least having one I had a company custom make.....
Overclocking Is Cool
(9) ive realised that i could overclock my computer my more than 400 mhz which save me like $600
instead of buying the latest release of cpu that people have dreamt about.... but buying a few fans
and a few tips and tools from people ive manage to clock my comp faster and the the performance is
obvious. the danger of overclocking is present but speding about $50 is worthwhile to get the
best outta your comp....
Looking for overclocking, overcloked, comp
|
*RANDOM STUFF*
*SIMILAR VIDEOS*
Searching Video's for overclocking, overcloked, comp
*MORE FROM TRAP17.COM*
|
advertisement
|
|
