Another article I did to compare IPV4 and IPV6.

Ipv4 vs. Ipv6

Ipv4 is the fourth version of Internet protocol, but the first one to be widely deployed. It uses a 32 bit addressing and allows for 4,294,967,296 unique addresses. Ipv4 has four different class types, the class types are A, B, C, and D. An example of Ipv4 is 207. 142. 131. 235. The ipv4 uses a subnet mask because of the large numbers of computers used today.

The subnet mask helps reduce the number of unique IP given to companies, corporations and so on. An example of a subnet mask is a company. A architectural company is given one ip address to use in their company. The IP that they are given is the class C addresses, 192. 182. 162. 0. However, the employees want to send information about the plan to a fellow employee. The default subnet mask is 255. 255. 255. 0 this default is used so that people can send instant messages to each other without downloading programs such as MSN messenger. The 0 in the subnet mask allows you to have 16 different networks having 14 computers per network allowing you to have a total of 224 computers in the company. You can create these networks by modifying the 0 the only number you can modify in the network. In the binary version of the 0 of the subnet mask it looks like this 0000. You can modify the numbers from 0000 – 1111. Those numbers will represent your network, you will then need numbers for your computer. When adding the numbers for the computer your IP would look like this in tens. 255.255.255.0-0 the zero after the dash represents your computer number. The way you can modify the number is the same as the network number, the difference is that you can only the numbers 0001-1110 in other words you cannot have all ones or all zeros. For further reference there is a diagram in the next page.

Ipv6 is the next in the advancement of IP’s. Although it is version 6 it will probably be the next widely deployed Internet protocol. Compared to the Ipv4 which allows for only 4,294,967,296 unique addresses, the Ipv6 that uses a 128-bit system will hold 340-undecillion (34, 000, 000, 000, 000, 000, 000, 000, 000, 000, 000, 000, 000) this number is so vast that there are more unique ip addresses than stars in the universe, as we know it. However, the Ipv6 will not come out till at least 2025 in because they need time to fix the bugs in the protocol. An example of Ipv6 is:
207. 142. 131. 235. 207. 142. 131. 235. 207. 142. 131. 235. 207. 142. 131. 235.

The reason we may need to switch from Ipv4 to Ipv6 is because of the population of the world. The rate at which the world’s population is growing is nothing to look down at. Also in the future all vehicles will probably be networked in order to use Onstar or other navigational devices and those need IP’s too. So eventually we would need more unique IP’s than the number we have now.

Resources:
http://en.wikipedia.org/wiki/Subnetwork
http://en.wikipedia.org/wiki/Ipv6
http://en.wikipedia.org/wiki/Ipv4
http://compnetworking.about.com/od/working...l/aa043000b.htm


Please inform me of any typos or grammar errors. Thx in advance.

 

 

 

Reply

I heard about this before.

Check out this

Federal agencies must use the next-generation Internet service known as Internet protocol version 6 (IPv6) by June 2008, the White House Office of Management and Budget announced Wednesday.

http://www.govexec.com/dailyfed/0605/062905tdpm2.htm

Wow, looks like its going to be phased in rather fast.

Reply

Thanks is not spelled thx. lol.

Reply

The other reason is that the majority of IPv4 addresses were assigned to North America. Countries in Asia especially are now having problems with clashing IP addresses because they were originally assigned so few.

This is not a racist, or power thing, the reason it's like this is because the internet grew from being a US military project.

Reply

There are a LOT of errors in this article.

To start with, there are 5 classes of IPv4 addresses, not 4.

He left out Class E (reserved by the IETF), and he didn't mention that Class D addresses are used only for multi casting, and are therefor completely unusable.

I think he means to say "subnet mask" when he says that the computer's IP would be 255.255.255.0.

Other errors include the fact that IPv6 is already out in a small sense, it will almost definitely become widespread much sooner than 2025, and the current implementations of the protocol represent IPv6 addresses in hex rather than in dot decimal.

Reply

When you have a subnet mask of 255.255.255.0, you will not have any subnets.

If your subnet mask was 255.255.255.224 then yes you will have 16 possible subnets with 32 possible hosts.

Cisco recommends that you do not use subnet 0 or 31 and not to use he subnet network ID and network broadcast ID in your subnet range, so that will lead to 14 usable subnets with 30 usable hosts.

-Dude

Reply

The basic difference between the IPv4 and IPv6 is the address length. V4 is 32 bit address and V6 is 64 bit address. So it obviously increases the addressing range for the internet. It also provides a completely midified set of protocols with extra features and it completely restructures the TCP/IP stack in all layers.

Reply

IPv4 to IPv6 , many of my friend were asking me why this migration from one IP to another version, then as i read books i understood the need for this migration.

In todays world almost each one has a need of more that one IP , for example , his laptop needs one , desktop one, mobile phone needs one, in such an increasing demand for the IP address we cant go exausted of IP , so that we have migrated to IP6 any way there is a good backward compactablity so that people using the old IP neednt be afraid.

Reply

I don't Knowwwwww Thanks

Reply

Replying to kuberan_swe
IPv6 is 128 bits long with three types of addresses. And two hosts can share the same address according to Cisco.

Reply