OK then, lets get started,
Step1.
Start off with a new document with whateve size you use. I use 350 x 150, but it is upto you. Then, set your colors to basic by pressing D
Step2.
Fill it all with black by either using the paint bucket or pressing ALT + BACKSPACE
I have this:
Step3.
Make a new layer by going to Layer>New>layer or by pressing CTRL + SHIFT + N and click OK. In this layer, take out your favourite brush set, set the mode to soft light (It's on the right side of where you pisk your brush set) and start brushing in white on the second layer.
I have this:
Step4.
Next, take out your render that you are going to use, select all of it by right clicking>Select all or press CTRL + A , then, press CTRL + C to copy it, then go to your sig and press CTRL + V to paste it onto your sig. It will make a new layer itself so no need to make another one. When that is done, press CTRL + J to copy the render layer. To resize the render if it is too big, press CTRL + T and press the chain that is in the nav bar when you press CTRL + T, this will keep the right ratio for the render and not bake it squashed. Hide the original render layer by clicking on the little eye beside it.
I have this:
Step5.
Now, with the copyed render layer, right click on the layer>Blending options> and pick the Soft Light mode for it. Then, go to Filter>Blur>Gaussian Blur and pick the settings that you like. It won't show that much colour when this is done, but, copy it a few times (CTRL +J) and move it them around until it covers the sig with the amount of colour that you would like.
I have this:
[hr]
OPTIONAL
Step6.
When that is done, merge all the Soft Light render layer by going to ayer>Merge Down or press CTRL + E untill all the soft light, blurred layers are all together in one layer. This colour will go but, all you have to do is copy it again by pressing CTRL + J. All that this is doing is making the layers less, so it is easier to navigate and will leave you with the same result as in Step5. I would recommend doing it, but, if you don't want to, it's fine
I have this:
[hr]
[hr]BLENDING
Step7.
now, your sig should start to take shape. Bring your none blurred render layer above all the other layers by holding it down and dragging it up. Take out your Polygonnal Lasso tool, and draw all around the render (Make sure that you are on the render layer and not another one). When that is done, Right Click>Select inverse. this will put those dotted lines all around the sig as well as the bit that you have selected. Now, Right Click again and click on Feather. Set the feather part to 20 px (You can put this higher or lower, depending on how you like it). This is going to change the dotted lines around the render, to smooth them out. Now. with taht done, press DELETE. (again, make sure that you are selected on the render layer) Your render will be faded at the side of it and will blend in more with the background. You can press delete as many times as you like. When you are satisfied, Right Click and press deselect. Now, take out another or the same brush set that you have been using, and brush a little bit in white on the render layer. The render should no blend in realy well with the background
This is what I have:
[hr]
OPTIONAL
If you notice that my sig here is a little bit differen, that's because I sharpened the render layer. All you have to do here is, (If you want to) is go to, Filter>Sharper>Sharpen. This gives a more realistic look and looks pretty cool
You can also fiddle around with how much you want sharpend by going to Filter>Sharpen>Unsharp Mask.
[hr]
Step8.
We are nearly finished now! All we need to do now is add a border, text, scan lines etc. What evere it is that You would like to do. All that I added was a border and very faint scanlines. To add a border like mine, make a new layer, press CTRL + A or Right Click>Select All, to select the whole sig. Right Click again and select Stroke. In the stroke option, make it 3 px with a black colour. Then, Right Click again, Stroke but this time pick 2 px and a white colour. Right Click and press deselect. The border won't look very good, but, not to worry, Right Click on the layer>Blending Options>Mode: Soft Light and the border will look good. If it is topo faint for your liking, duplicate the layer by pressing CTRL + J. Look below on how to make Scan Lines
Scan Lines
[hr]
Now, making scan lines.
This is done differently, I'll show you how I did mine:
First off you need to make a new document, with a 5x5 pixel height and width, with transparency on.
When you make the new document, zoom into it's full zoom
Then grab you Pencil Tool with 1px and do this:
Once you've done that, go to Edit at the top and down to Define Pattern
Give you pattern a name if you wish.
Then go back to your USig document. Make a new layer, Right Click>Select All or press CTRL + A. Right Click>Fill. When you are here, pick Pattern in the drop down box and then, click on the newly made scan lines pattern. You can pick how string you want them with the opacity level. If it is still too strong, you can go to Edit>Fade Fill or, (What I do) Right Click on the layer>Blending Options>Mode: Soft light and this also looks pretty good.
[hr]
Now! You are finished! This is my result:
They can all vary, depending on the options you pick and customise.
I hope you liked it!
please, post your results if you want, I'd like to see them
