bhavesh
Apr 9 2007, 01:54 PM
| | my site is down after HDD change.
there is no folder in file manager, all files, folders, data of my site are lost.
also unable to upload files, unable to check mails.
lots of problem. please help soon and rectify the problem.
my userid for cpanel is bhavesh |
Reply
Sprnknwn
Apr 9 2007, 02:40 PM
We told what happened in the other post and now is closed so this is probably going to be closed soon also. Be patient, I know it's hard but I'm sure they're working on it. Anyway I don't understand why did they close the other post, because Opaque told us to keep him informed on possible errors after change and that's what we were doing... my problem is still that I cannot access to phpmyadmin. I also don't understand why the panel has changed and if this is temporary or not, because I liked the other most.
Reply
bk2070
Apr 9 2007, 04:50 PM
The other topic was closed because many members were complaing about the same problem over and over again. It was pointless to keep it open as the same members were asking the same questions. Now the Cpanel was upgraded to Cpanel X and this is permanent. I dont no why you are complaining about the new cpanel as it has more features.
Reply
Saint_Michael
Apr 9 2007, 05:40 PM
bhavesh last night I told you what I mentioned to your brother, in which he should have told you everything I told him besides the HDD being swapped out. That their have been problems going on all over the place since the cpanel and hdd swap, all your files are safe in some other part of the system and that's reason you can't access them at the moment. Due to fact that that were most likely they were part of the HDD disk failure and if they were moved back their would be a slight chance they could be deleted. It is obvious from the admin silence that they are still working on the problem ( I don't think OpaQue has even slept since then). Once they got everything figure out and the problems are fix then they will let you know. So be patient and wait it out. Yes it's a bummer that you can't do anything with your website, but these things happen during upgrades and what not. All I know is that trap and asta have been affected by this, I don't know if computinghost or even quipis by this, but most highly doubtful since they are on different servers.
Reply
bhavesh
Apr 9 2007, 06:13 PM
actually I have contact Opaque through yahoo messenger, and he has suggested me to contact support and give the userid for cpanel, thats why i have started a new topic here. Also I have full faith in Opaque, it will take time but I belive he will solve the problem. He is doing a good selfless service, and I think all the lucky winners (whose sites are affected) should show patience and give admins time to solve the problem. May God help admin to solve the problem and retrieve all the data safely. Amen.
Reply
Sprnknwn
Apr 9 2007, 06:31 PM
QUOTE(bk2070 @ Apr 9 2007, 06:50 PM)  The other topic was closed because many members were complaing about the same problem over and over again. It was pointless to keep it open as the same members were asking the same questions. Now the Cpanel was upgraded to Cpanel X and this is permanent. I don't no why you are complaining about the new cpanel as it has more features. Yes, I know people was complaining over and over again, and I don't support that... in a a free hosting like this. It's really selfish. Admins are human beings and you can't expect them to work for each user for free. Anyway, based on previous experience, I think Opaque does it and pretty well. But I think is better to let the people talk about the problems in their sites than shutting their mouths because this way they'll feel unheard... when we know that it's not like that. As for the cpanel I don't know much, so I was just asking. I didn't know that CpanelX was the newer version and I didn't know that it had more features (it doesn't look like it, at first sight) but I found the previous version better, at least visually... for example the first thing I noticed is that there isn't a direct link to phmyadmin (probably the feature I used most) and you have to enter first in mysql databases. Anyway, I'll get used to it... as I said before, I was only asking, not really complaining. Sorry. EDIT: To say that I can enter phpmyadmin now 
Reply
OpaQue
Apr 10 2007, 04:28 AM
Please check the site now.
Reply
biscuitrat
Apr 11 2007, 10:40 PM
I'm having this problem as well; but my website displays, so I know my files are there -- I just can't see them through File Manager :/
Reply
blackrabit
Apr 11 2007, 11:02 PM
I have the same problem as described above, my file manager in cpanel shows the following error message: [a fatal error or timeout occurred while processing this directive] and the trash panel shows this message: Unable to change directory to /home/blackrab/.trash! You do not seem to have access permissions! (System Error: Permission denied)However I can see my site so I know it's there but I'm only unable to see its content on file manager. Through FTP I have the same result no files or folders show under the root "/" folder but if I type the path like "/www/home" or "/www/" to the folders under the root I'm able to see their content. I'm also having problems with mysql, it shows the following message when I try to open my "/home/index.php" file which is my main page: Consulta: SELECT * FROM phpraid_profile WHERE profile_id='-1'
Detalhes: Table 'blackrab_forum.phpraid_profile' doesn't existI don't know why mysql is serching for " blackrab_forum.phpraid_profile" when my script only searches for "phpraid_profile", obviously the first don't exist, I already tried to look at my script if there is any error, but it works fine on other servers. The table where the data is, is called "phpraid_profile" and is in the "blackrab_phpraid" database, there are another database called "blackrab_forum", but that is not searched by this page of script or any include there. By the way if the my account id is usefull to solve the problem then here it is: blackrab Thanks a lot Opaque for any help you can give me...
Reply
dundun2007
Apr 12 2007, 12:02 AM
i keep getting this error when trying to access my site "Server Requirement Error: register_globals is disabled in your PHP configuration. This can be enabled in your php.ini configuration file or in the .htaccess file in your catalog directory." I am guessing its because i dont have fantisico e-commerce on my cpanel. Take your time i am in no hurry just thought i should express the problem.
Reply
blackrabit
Apr 14 2007, 01:09 PM
As you told us I'm posting here to remember that my problem described at this post: QUOTE I have the same problem as described above, my file manager in cpanel shows the following error message:
[a fatal error or timeout occurred while processing this directive]and the trash panel shows this message:
Unable to change directory to /home/blackrab/.trash! You do not seem to have access permissions! (System Error: Permission denied)
However I can see my site so I know it's there but I'm only unable to see its content on file manager.
Through FTP I have the same result no files or folders show under the root "/" folder but if I type the path like "/www/home" or "/www/" to the folders under the root I'm able to see their content.
I'm also having problems with mysql, it shows the following message when I try to open my "/home/index.php" file which is my main page:
Consulta: SELECT * FROM phpraid_profile WHERE profile_id='-1'
Detalhes: Table 'blackrab_forum.phpraid_profile' doesn't exist
I don't know why mysql is serching for "blackrab_forum.phpraid_profile" when my script only searches for "phpraid_profile", obviously the first don't exist, I already tried to look at my script if there is any error, but it works fine on other servers.
The table where the data is, is called "phpraid_profile" and is in the "blackrab_phpraid" database, there are another database called "blackrab_forum", but that is not searched by this page of script or any include there.
By the way if the my account id is usefull to solve the problem then here it is: blackrab
Thanks a lot Opaque for any help you can give me... has not been resolved yet and more than 2 days passed since I sent the email to the support@xisto.com as you described. Thanks for the attention...
Reply
Similar Topics
Keywords : prob, hdd, change
- How To Change The Gradient Type And Make A Gradient On Adobe Photoshop Cs3
(1)
What Would You Rather Change In Windows
minor things that annoy me in Windows (5) This is not a Win/Linux/Mac dispute, rather pointing out a few minor things that I find really
annoying in Windows OS and I'd rather change if I had the chance/knowledge (disclaimer: I mainly
refer to winxp but I've used almost all other versions, I have some experience with Linux and
almost never used a Mac OS) copying/moving files: ever tried to copy a folder containing one or
more corrupted files? if I were the OS I'd just skip those and copy the good ones, then prompt a
message "file x, y, z were not copied we're sorry for the inconvenience caused".....
Chage Ip Adress
Change Ip adress from modem (2) Hy, I was wondering if someone know a solution for my task...I won't bother to look the net for
these if I get no response here. I'm using a Motorola modem my motorola modem that the ISP
gave me.. and in contract they say there's a dynamic address (this only for fiber, for cable
they do not specify) but I only get the same IP address everytime I connect; some clients told that
they were able to get dynamic or other IP addresses after a few months.. anyway I wonder what can I
do to obtain other IP adress or dynamic Ip address. If someone can help me, post he....
Change Domain Name On Account Creation?
(2) My request for host account has been approved. In it I asked for a sub-domain. I have not yet
created my hosting account. Now I have bought a top level domain. Can I use that Domain Name
instead of the sub-domain I requested in my account creation process? Or do I have to first use
the sub-domain and then use the 'domain changing process' to change it to my new domain? ....
Power Distribution Change Reboot After 8pm Pst On Saturday May 31, 2008
Scheduled Reboot - All Web Hosting Accounts (5) We will be doing power distribution changes after 8pm PST on Saturday May 31, 2008. We will be
doing power distribution changes after 8pm PST on Saturday May 31, 2008. Changes are being made due
to the rapid migration that was done. This change will insure future stability in the future of
power distribution as summer arrives around within the coming months. Brown outs, blackouts, etc...
occurs within this this season and we are preparing for random reboots and crashes. We are
anticipating a downtime of no longer than 15 minutes as we modify our power distribution. All....
Change Out Free Subdomain
(2) Can we change out free subdomain provied by the Qupsis to our own domain name after registration.
Is this allowed. Or i should delete the account and apply for a fresh one on qupsis.....
Your Love Can Change Your Enemies!
(0) A Christian is under an obligation to love God, and also to love others. Why should he love God?
Because God first loved him, even when he was still a sinner! Yes, God’s love came
unconditionally, without expecting anything in return. However, this is the most important reason
why we should love God always. Loving God is also closely linked to loving others. The Bible says,
QUOTE "If anyone says, "I love God", yet hates his brother, he is a liar. For anyone who does
not love his brother, whom he has seen, cannot love God, whom he has not seen. And he has given ....
Change To The Way Hosting Credits Work?
Was something changed when I wasn't looking? (8) I was just wondering if something changed in the way that the hosting credits work here... because
I'm pretty sure that I had enough credits to last a few more days, cause I built up a bunch the
last time I was here... but since I noticed that I haven't gotten many hits today, I checked my
site to see if it was still up and running. That tends to be how I see if I need to get back over
here and posting. Well, I can understand if I ran out of points, cause it certainly wouldn't be
the first time... but what's getting me is that my site has been down less ....
How Do I Change The Default Windows Font Size?
Without changing DPI, of course. (3) I know there's an option in Ubuntu to change all the font sizes of the general system, the
windows, and etc. Now I'm trying to do this in Windows. I've changed everything about
the windows except for the general system size. How do I do this?....
A Question Regarding Rule 16 Of The Tos
And a request for a name change. (2) Hello, I must admit that when I joined trap17, I did not immediately read the terms of
service--this is, after all, a forum, and my general experience with forums has been to simply use
common sense. However, after achieving 30 credits, I began to look into how to apply for default
hosting--and saw that I was in violation of a rule I did not know about. My username is the name of
my organization, which is what I plan on my site being about--I thought this was appropriate, given
the nature of this forum. However, looking at the rules I can see the pretense for all of th....
I Would Like To Change My Domain Name [resolved]
how to perform with currently parked domain name? (4) Dear administrator, I want to change my domain name
“www.cncinfotech.uni.cc” to “www.cncinfotech.in”. Second domain is already added by me as a parked
domain. Because www.cncinfotech.uni.cc was a free domain (which is not working and deactivated by
uni.cc ) and choose by me when I opened my first hosting account. Please change my domain. I have
more than 15 hosting credits. My cpanel is also not working. After changing my domain name please
also check my cpanel and ftp service. I hope you will do it soon. Thanks in advance.....
Changing Dns Records
How to change my DNS records? (5) I need to change my DNS records, that is, to add several CNAME records... Now, I registered my top
level domain (.net) through my ISP, and they in turn registered my domain at some other registrar...
Now, my ISP doesn't give me CPanel to update my DNS info, if I don't buy their hosting plan
(which is pathetic compared to Trap17 free account)... I had them change my nameservers to Trap17
servers, and now, they tell me I need to edit CNAME records on Trap17 nameservers... I must admit
I'm not really familiar with how all that DNS administration works, so I want....
Colors/styles For Text?
How do we change colors? (2) How do i change colors or styles of text in c++? like for colors eg. : hello world for styles:
Hello World ....
Change Your Computer Password
Change Your Computer Password (6) This Topic will teach how can you change your without knowing your old Passward 1. Click "Start"
Then Click "Run". 2. In the dialog box type in "CMD" and select "OK". (Opens Command Prompt) Or you
can manually open CMD by navigating to "C:\WINDOWS\system32\cmd.exe". 3. Once
Command Prompt is open, type in "net user" and hit enter. This will display all user accounts. 4.
Now type in the following command: " net user (ACCOUNTNAME) * " and hit enter Example: net user
Trap * (Dont forget to add the asterisk) 5. Now it will ask for a new password, enter....
Background Image Swap Script
Change a Background Image based on clock time (15) Background Image Changer Script To swap the background image from your CSS file according to the
Server Clock Time. 1.) In your CSS file, add the following rule: CODE body {
background: url(time.png); } 2.) Create a "folder" named time.png. 3.) Into the
folder, place three images named morning.png, day.png, night.png. 4.) Also, in the same folder,
create an index.php file and copy/paste the following script. CODE <?php $hour =
date('H'); if ($hour < 12 ) { $image =
"morning.png"; } ....
How To Hack Windows Pinball!
A tut on how to change your score on Windows Pinball (24) This is my first tutorial and my first post so i hope you like it! First of all to be able to
hack windows pinball you will need the Cheat Engine available from
http://www.cheatengine.org/CheatEngine53.exe . After installing the program open it up and skip the
inbuilt tutorial unless you want to do it. First play Windows pinball for a bit to get a good score
(just use one ball) then click in this icon in the top left-hand corner of the cheat engine. Now
you should see a list of programs running at the moment, scroll down to find the file PINBALL.exe
which is Wi....
Change My Ip
how? (25) hey, can anyone please tell me a easy way to change my ip? if this helps my internet is cable
so...can anyone please tell me how? /smile.gif" style="vertical-align:middle" emoid=":)" border="0"
alt="smile.gif" />....
How To Change Windows Xp Language ?
(23) my mate bought me a laptop from Paris .... now the problem is i dont know how can i get windows in
an english version... currently its french. I have tried all the possible ways... its not even
letting me boot from my own cd. Any help would be great....
Sentences In Certain Books Which Change Your Life
whats yours... (7) here are some sentences which i think may be very philosophic. from some books iv read. 1. if
there's a person who you think worths you protecting life long,happy what he/she happies,sad
what he/she sads,worry what he/she worries,then the life gets no regrets. 2. where make your heart
calm,is your home. 3. making faults once,twice,third times etc has no relates with the destiny,the
space and the time.it just because we have a certain weakness in the character. 4. people differ
from each other.the day's going to rain so the birdss going to fly.some things we c....
What Is Phase Change Cooling?
and how does it work? (14) I first came across phase change cooling when I bought the Zalman CNPS9500 heat sink. Basically
the base of it (which is pure copper) is connected to what is being called "Heat Pipes (also pure
copper)" and then a bunch of little copper "Fins" are attached to that. The fan sits perpendicular
not parallel to the base which is why I bought it. I was curious as to how it could cool better than
some water cooling that I decided to do a little research. I found out that the "Pipes" are actually
hollow and they are filled with some type of liquid that at room temperature is ....
Dynamic Image / Signature Generator
a simple code to change text on an image (12) In search of dynamically changing quote, saying or all other types of text on an image I came across
a code that I have modified to fit my initial usage. This procedure requires two files and short
knowledge of PHP. If you are familiar with Trap17's sig rotation code you will understand this
procedure very fast. Code 1: dynamic_sig.php (you can rename this to index.php and you'll see
at the end why) Code 2: a simple text file named anything (I will call it name.txt ) Code 1
CODE <?php header("Content-type: image/png"); �....
What Eye Colour Would You Prefer?
If you could change it? (92) Oooh! Oooh! I like.... I DUNNO!!!! /blink.gif' border='0'
style='vertical-align:middle' alt='blink.gif' /> /blink.gif' border='0'
style='vertical-align:middle' alt='blink.gif' /> /blink.gif' border='0'
style='vertical-align:middle' alt='blink.gif' /> I JUZ DUNNO!!!! /ohmy.gif'
border='0' style='vertical-align:middle' alt='ohmy.gif' />
AHHHHHHHHHHHHHHH!!!!!!!!!!!!!!!!!
;!!! /ohmy.gif' border='0' style='vertical-align:middle' alt=....
Change / Modify The Title Bar Text In IE6 Or FF
custom text in titlebar in ie or firefox (3) Changing The Text In The Bar (IE and Firefox Only) This will allow you to change the text in
the title bar of either msie6 (may work for ie7 beta or earlier versions) and mozilla firefox 1.0.
By default this is set to Microsoft Internet Explorer provided by ##### or Mozilla Firefox .
Here's how to change that..... For Internet Explorer (6) Warning! Changing the title
for internet explorer requires editing the registry. Making changes in the registry in keys or
values that are not listed here could cause your computer to crash or slow. Follow the fo....
How To Change The Windows Xp Shell.
(17) What is the Windows xp shell? The term shell reffers to the graphical user interface (gui) i.e the
desktop and the task bar, basically explorer.exe (the default windows shell). Where can I find a
replacment shell? The best place to start is with some shell information sites, I would recommend
Shell-Shocked , Try these: Litestep Xoblite (Blackbox) Geoshell I would personally
recommend Litestep. now you have a shell heres how to manually set the default shell in windows xp
Changing the default shell (all users): 1) open regedit (start menu > run, and type i....
Whow to change template on php nuke
(4) Whow to change template on php nuke
Thanks....
Do you hate the change in TECH?
(1) i hate it. every time u buy somethin for like 20$ later that month it drops to like 15$ due to the
fact that a NEWER one comes out and then you have to buy the new one if you want to have a good
enough program or game for your PC. I wish that for the people that alreay have the previous
programs NOT games could get updates for free.....
Read-only Folders In Xp
Can't change Read-Only attribute in XP (13) Hi, I am working with a firma. We use WinCvs which is a software similar to perforce. I downloaded
the developement to C: (eg. c:/development) The folder c:/development and the folders under it have
Read-Only permisions. I need to remove that restriction. I press right-button, i unchecked the
read-only check-box and i apply to this folder and folders under it. Whe it finisehd i click ok. Whe
i press the right button again i discovered that the folder has still the read-only attribute. So it
seems nothing changed. something similar happen to you? How can i uncheck the ....
Change Font Size On Taskbar Buttons
(4) Would you like larger fonts on your taskbar buttons? Maybe you're a little short sighted, or
just want to mess about a bit:) Here's how to do it... 1. Right click anywhere on your Desktop
(not on an icon) and the context menu appears. 2. From the context menu, select Properties, and the
Display Properties window appears. 3. Select the "Appearance" tab by clicking on it once. 4.
Select the "Active Title Bar" from the "Item:" drop down list. 5. Adjust the font size, color,
bold, or italics using the selectors to the right of the font box. 6. Click Apply to ....
Changing A Dynamic Ip
How to change your dynamic IP. (18) In this tutorial I will tell you how to change a dynamic IP if you have Windows XP. First of all go
to - Start >> Run - and type 'cmd'. A window with a black background and grey text. In
this window type 'ipconfig' and text should come up saying: IP Address ............. *IP
HERE* Subnet Mask ................ *SUBNET MASK HERE* Default Gateway .......... *DEFAULT GATEWAY*
Write this down on a bit of paper on in notepad. You will need them later. Now type
'ipconfig/release' - this will terminate your internet connection - but don't g....
Delphi Tutorial - Change Your Start Button Caption
(4) How to change your start button caption using Delphi! (By the way, the start button will be
renamed back to "start" after you restart your computer) Here we go! 1. Create a new project
in Delphi 2. Add a Button and an Edit box to your form, place them where you want. 3. Double click
the button to enter the code editor so we can type code for our OnClick event. 4. The code for the
OnClick event of our button should look like this: CODE procedure
TForm1.Button1Click(Sender: TObject); var Handle1,Handle2:hwnd; begin
Handle1:=FindWindo....
Looking for prob, hdd, change
|
|
Searching Video's for prob, hdd, change
|
advertisement
|
|
