Linksys Befw11s4 Wireless Router Issue

contor

Sep 22 2006, 08:44 PM

I have an linksys wireless router Befw11s4 and my doubt is: it is normal that my router freeze, and i have to restarted, and why it hapend

BuffaloHELP

Sep 22 2006, 10:51 PM

Topic moving to Computer > Hardware (remember this section next time).

No it's not normal to "freeze" something that cannot be frozen. So describe how it freezes. Is it cold? Does it stop working like a router? Are you unplugging the power to make it work again? How did you set your router, as a router or a gateway? Do you have your DHCP enabled? If so is your router IP address conflicting with your modem? What kind of broadband service do you have, i.e. PPPoE, Auto-dynamic or Static?

These are the important information you should provide when you are requesting for a hardware support. Otherwise, your initial post is meaningless and empty.

contor

Sep 23 2006, 12:19 AM

i stop working reciving/sending information, it is a gateway, the dhcp service works fuine, the ip's are ok i check it

Saint_Michael

Sep 23 2006, 03:22 AM

Heck I can't even help you what I suggest is call tech support they should be able to help you, the lack of info still isn't helping me at least.

BuffaloHELP

Sep 23 2006, 03:31 AM

Most likely you are not connected to your own wireless router. This is #1 mistake users make when using wireless router out of the box.

See if you can enter your router admin control... usually 192.168.1.1 Change your SSID to something unique, like your street name spelled backwards. Once that is changed see if your wireless connection shows the same SSID. If not, the reason you're not connecting is because you're not connected to the correct router--and not your router not sending packets.

When you know you're connected to correct SSID, use your wireless connection control to set that SSID as preferred. This is the time to install WEP for your wireless. Refer to your manufacture's instruction.

To avoid further hacking attempt from free loaders from outside trying to hop onto your wifi, disable broadcast of your SSID *optional.

Try this first and see if you're having further issue.

darran

Sep 23 2006, 11:20 AM

I remember a few days ago doing something similar like this.

I set up my router perfectly well, connecting to my PC and putting it in a high position so it is easier to broadcast the signal to the other wireless device in my house. I used Windows to connect into my wireless network which is broadcasted.

However i typed the wrong password and it simply hangs there for close to 20 minutes before giving me a 'limited network connectivity' message without actually telling me that the password was a wrong 1. Another poor glitch of Windows I am afraid.

Is that your problem?

kdr_98

Sep 25 2006, 07:19 PM

It's not easy to give help with such a fault description.

But to be sure that you are connected to the right router :
- Connect a PC with a LAN cable to router.
- Change the Broadcast SSID to something unique like router_06
- change the channel to something unique (I think the default for most routers is channel 6)
- Remove the LAN cable.
- connect a PC wireless
- Search ou SSID (and channel) in the list set this connection as default.
- Now you are sure that you are connected to your own router.

If possible protect your router with MAC adress list.
And an encryption protocol (so others can't use your router).

contor

Sep 25 2006, 07:46 PM

Yea i know and tried everything you suggest but it continues happends, but ist no frecuent anymore, maybe the problem is the numer of packages per second it has to trasmit, thanks a lot anyway

kdr_98

Sep 26 2006, 10:55 AM

If the link quality is low on 54 Mbps , you can always fix the speed on 11 Mbps.
(The link speed can set on your computer).

Or try another channel (some channels may have less problems).

BuffaloHELP

Sep 26 2006, 11:45 AM

I forgot to tell you one other thing: be near your router when doing this. Some houses have lead or dense insulators that might block or interfer with good connection. Try with direct line of sight (meaning nothing is blocking the path between your computer and the router.

Try limiting anything that is radio frequency generator, i.e. lights, TV, cell phone, cordless etc.

And did you find out if your SSID matches one that you assigned in the router?

Latest Entries

iGuest

Jun 25 2008, 09:48 PM

slow speeds with linksys BEFW11s4
Linksys Befw11s4 Wireless Router Issue

Hello everyone. My cable internet connection has a download speed of about 6 mbps. However, when I connect my BEFW11s4 the fastest speeds I can get are around 1 mbps. Can I fix that? Any help? Thank you.

-question by Alexbrla

ADD REPLY / Got an Opinion!	Remove these ADs!	RAPID SEARCH!	Free Web Hosting	[X]
Express your Opinions, Thoughts or Contribute more info. to help others. Ask your Doubts & Queries to get answers, So that "Together We can help others!"	Register FREE for AD-FREE forum, Create your own topics, Ask Questions, track topics, setup subscriptions & notifications and Get a Free Website w/ Email and FTP.		500MB Space No Ads, CPanel, FTP, PHP, MySQL, EMails - 100% FREE

Linksys Befw11s4 Wireless Router Issue - it is usual??

Linksys Befw11s4 Wireless Router Issue - it is usual??

Latest Entries