Ok i have recieved as a present my uncles dell latitude x1 laptop. Its Operating system ahs been re
installed and it worked for the first few hours i had it but then it started randomly locking up and
making a weird sysren noise, and now when i try and boot it up it says that no hard drive or
bootable devices can be found. What can i do, is there anything that i can do insted of calling dell
out on monday (still have next day support) and has any one else had this problem. Thanks...

Hi, A friend of me call me telling me that his computer is *BLEEP*ed up. His computer turns off
before anything comes into the screens. Three beeps sound before it turns off. He asked me for
advice but i did not know what to tell him. I guess could be the Bios but i do not have a big
background experience with this computer problems. He told me he was cracking a program or something
like that. So, maybe a virus *BLEEP*ed him. If anyone know what is the problem and what it is the
solution would be really nice. thanks in advanced!...

QUOTE I've made simple batch files using cpuburn4 in conjunction with runprio.exe for
maximum stressing of components. Important: Be sure to close all open documents. If your PC crashes
during testing, your data will be lost if you don't. I'd recommend not to use your PC while
testing, since it will be very slow during testing (the test is run in high priority mode). After
downloading the ZIP file, do the following: - Extract. - Now run one of these files:
!burnP5.bat - Intel Pentium w&w/o MMX processors !burnP6.bat - Intel PentiumPro, PentiumI...

After installing a new 2.8 GHZ P4 my computer will not boot. All fans spin but no POST. Another
interesting fact is that my CD-ROM will not power up either (works on my old 333mhz system though).
Reading around I've learned that the problem is either: 1)mother board 2)CPU 3)PSU I have tried
it with a brand new MB but no success, still no POST. Is it possible that my cheap 425watt PSU will
not generate enough power for this new CPU (even though it successfully powered my 2GHZ celeron)?
Unfortunately, the pins on the older Celeron got bent so I cannot test with this...

I hadn't been able to play the Sims 2, and I figured out it was because my video card wasn't
supported. So I went out and picked up a cheap GeForce FX 5200 ($50) and installed it in my
computer. Well as soon as I turned my computer on, everything was normal. But I noticed the
resolution was huge when it got to my desktop and when I went into Display Properties, it was the
only resolution setting there. So I figured I'd install the video card drivers that came on the
software CD. After that it prompted me to restart my computer, and when I did, everything...

Well I got two weeks left in the semester and on August 18th I will have built my first computer
from scratch, now hopefully during the rest of the year I will have build up a series of topics on
computer hardware and tutorials on building a computer from scratch that most of you will never have
to buy a pre built system again /biggrin.gif" style="vertical-align:middle" emoid=":D" border="0"
alt="biggrin.gif" />. With that being said this is the final specs of the computer I will be
building, after I had a fluke with my floppy drive (had the wrong one). Keyboard &...

Got a question, Again. I want to be able to have to monitors, Two keyboards, And two mouses. So
that they can be all hooked up to one computer but I can have several users doing different things.
But so that I can connect to the internet on the computer and all the users be able to share it at
the same time. I have Dial-up. So the question is, If I get another monitor card so I can hook up
two monitors will that work? Then there is this thing that you plug it into your computer, and it
comes with software and it has several monitor, keyboard, and mouse ports on this ...

Allright im looking at upgrading because my computer starting to become stupid... (games are lagging
when they shouldnt be... heres what i have now so you can base this for what to sujest to me (i
want better lol) CPU: intel 2.8 ghz RAM: 1gig motherboard: intel pos motherboard... (it works for
what i have now...) Cdrom: DVD R/W 16x i belive 3x 40 gig hard drives (im going to get at least a
120 gig) GPX: Nvidia Geforece 4ti 4600 (im looking at the ATI 1950x crossfire but thats a little out
of my budget... but its an awsome card...) Monitor: 21" (i think its huge...) s...

There is a contest right now for this computer, and I have to say that this beats the $20,000+
Mac Pro computer by a whole lot in terms of hardware, software, and other stuff /laugh.gif"
style="vertical-align:middle" emoid=":lol:" border="0" alt="laugh.gif" /> Also I providing links to
all the stuff just in case someone wants to buy the parts seperately and junk QUOTE •
GIGABYTE 3D Mercury GZ-FW1CA-AJS Silver Aluminum ATX Full Tower Computer Case – $399
• Custom Case Painting by Gary Berg - $1500 • OCZ ProXStream 100 watt...

I have a problem with my computer. How come it's restarting on its own? When the electricity
fluctuates, the computer restarts. I cannot control that though and that is tolerable given the
quality of electric lines here in my country. But sometimes there are no electric fluctations and
it is just restarting on its own. Is this spyware, trojan or virus? I scan my system regularly
using Adaware and AntiVir. I am not that good in troubleshooting computers, so can anyone help me?
Formatting my hard disk is my last resort because I am open to other options. Wha...

I have looked at the new microsoft computer called microsoft surface, it looks amazing but slightly
too expensive for me at the moment at £17000 onwards. Also I have heard from my mate that there is
a new apple computer which is coming out shortly. It has 2*quad core x2.4Ghz processors and 40 gb
of ram. I think thats crazy but £17000 may be worth it....

Well, my Dad and i bought it off a New Zealand internet auction site (trademe). Luckily the seller
lived in the same town we do. Anyway im not going to say how much it was, just that it was between
200-400 US Dollars. The main specs are 2.0GHz 768mg RAM (Upgrading in future) 40gb Harddrive
(Upgrading asap) CD Writer and DVD reader 64mb video card (upgrading in future) It has 7 different
media bays for video cameras etc. LAN card, Internal modem card, Audio card, 2 USB ports at front
and 4 (i think) at back. Both run at 2.0x speed. Comes already with XP Pro and Office ...

Well hello guys, I am back for as long as i can remember this place /tongue.gif"
style="vertical-align:middle" emoid=":P" border="0" alt="tongue.gif" /> I just wanted to let you
know that I am building my own computer, custom computer, and wanted to know your comments, and
opinions. I started with a Dell Dimension 8100 pent 4... 1.5GHz and 256MB of ram. I was sick of it.
I bought a new computer. Dell Inspiron 530s (Core 2 Duo processor, 2 gigs, vista, and all that good
stuff). I was still hungry for more power, so now i am starting my custom computer building. It s...

Friends recently i had my computer thrilled with failure to start. I contacted the system dealer ,
he said that the RAM had the problem and replaces it , my old RAM is a 1 GB RAM. I saw the RAM in
that we have the copper teeths like structure in the bottom which fits in the motherboard there one
copper stripp has come out . Is there any solution or must i throw the RAM ? Title modified ...

Okay, this is the second time building a computer on my own. The motherboard had a 24-pin socket but
I didn't notice that the power supply had a 20-pin connector with an extra 4-pin to go with the
20-pin one. So what I did without knowing the proper connection, I connected the 20-pin to the
240pin socket on the motherboard and the extra 4-pin to the 4-pin socket across from the
motherboard. The correct 4-pin was left hanging and wasn't used. So after all these things were
done and I connected the power cable to the PSU and switched it on, I heard some popping so...

Hello Trap17 Friends, I am posting this because I need help to get a computer screw unscrewed, the
problem is that I sort of forced it a while back and it is sort of deformed. I am able to get all
the other screws out except this particular screw. I need to get it out so that I can check the
thermal paste on my processor and to clean the heatsink. I might even swap out the processor soon,
so before I buy a new processor for it, I need to be able to get that screw unscrewed. Does anyone
here have any tricks or ideas? Thanks.. /smile.gif" style="vertical-align:middle"...

I have a 5.1 Sound System. It works great in 2 channels but when I switch to 5.1 the subwoofer
ain't working. My motherboard has a nvidia 4 ultra chipset so it supports 5.1 configuration.
Also in nvidia mixer when I use sound test everything is great and I can hear the subwooofer working
as is should. But when I want to watch a movie or listen to music the subwoofer is as good as dead.
Can somebody help me? ...

What's the cheapest I can get a computer for? Specifying details and clear communitcation of
what you are looking for is very critical in our forum. Topic title modified. ...

ahhhhh! /ohmy.gif" style="vertical-align:middle" emoid=":o" border="0" alt="ohmy.gif" /> ok,
Last night i was on my computer. just like always i went to shut it off. so i went down to shutdown
just like always. it shutoff fine. i booted it up again this morning and now everythings gone. it is
just as if i had reinstalled windowsxp. some of my files that i have saved to mydocuments are gone.
but everything else is gone. i thought...... hmmm no problem i will just do a system restom to get
my computer back to how it was. uhh no cant do that. a parantly the system t...

Hey all. The outlets in my room are not grounded, and I want to eventually get a computer up and
running in there. Do you think that it is dangerous to do so, and if so, how dangerous is it? Are
we talking computer-dying dangerous, electrocuting myself dangerous, or some other kind of
dangerous? Thanks, folks....

What site is the best to assemble a custom computer? I have been thinking about buying my own
computer but I'm not sure which site I should use. Topic title modified. ...

I'm thinking about building a new computer to integrate into my car. I would use it for audio,
games, etc... Has anybody ever done this? I know that percautions have to be made for vibrations,
and you would have to use a very small lcd screen. Does anybody know how to do this?...

Well if this topic does not belong here, please feel free to delete/move it. Here's how the
story went: My friend's computer crashed on him and he asked me to come over and have a look.
So I did and here are some errors that appear: Boot cd-rom Boot cd-rom Cannot load press
ctrl+alt+delete to restart After I restart it the same thing happens all over again. (Note: the
message is very similiar to that above but I didn't write the exact message down). I tried the
restore disk and then that too did not work even after I log into windows, the computer fr...

I am saving up for a new computer. My birthday was August 25th, and my rents gave me $400
towards a new computer. So a couple more bucks and I'll have enough for the one I'm looking
at. AMD Athlon 64 X2 5000+ 2.6GHz (Dual-Core) 2GB DDR2 (Upgradable to 4gb w/ 4 slots) 320GB Sata II
harddrive (3 more sata slots available) DVD±RW Dual-Layer Nvidia GeForce 6150 SE 7.1 Sound I got a
250GB Sata sitting in my desk unused, after I install that It'll bring the Harddrive space up to
570GB. 6USB ports/2Firewall $499 CAD - Its a refurbished gateway from ti...

I am getting a new monitor and I plan to use it for gaming, WoW, BF2 etc. And I was just wondering,
for being on a budget if the monitor is fine, I've read about ghosting and dead pixels and such
and was just kind of worried about getting the wrong one.
http://www.tigerdirect.com/applications/Se...318#detailspecs That's the link to it... But
it's Hanns·G HW-191D 19-Inch Widescreen LCD Monitor. Response Time: 5 ms Pixel Pitch: 0.294
x 0.294 mm Display Colors: 16.2 million That's what I think is important, and I think that
would be fine, just doubl...

QUOTE AMD Athlon XP 1800+ 1gb PC2100 DDR DFI AD73 Pro ATI Radeon 9600 Pro 128mb too lazy to list
all my storage devices Ye Olde Sound Blaster PCI a TDK DVD +\- DVD and CD burner including PSU
fans, 9 80mm case fans a USB 2.0 PCI hub card some old 10\100 lan card 430w Antech Truepower
PSU Windows XP Professional w\out service packs, Mandrake Linux 10.0 (dual boot baby!
/biggrin.gif" style="vertical-align:middle" emoid=":D" border="0" alt="biggrin.gif" /> ) some
awesome looking Raidmax case thats it for me. what are you guys runnin'? /smile...

Well my hardware is class is almost over and after reading are weekly chapter the first discussion I
wanted to bring to the class was data backup technologies, the website I am using for as a reference
is this one . To talk about about what people think of old and new technologies used for backing
up your computer's data. So the first website I came across is the pro's and con's of
method of backing up dating through current or latest technologies. The first one the article talks
about is ancient technology of the floppy drive as for the history lesson I ...

Ok if any of you here are like me, you like to build computers. I have built several computers for
people and loved doing every single one i built, i was looking for a new case to build my next
personal computer in and i ran accross this monster from thermaltake. The Armor VA8000 Series, which
can be found here http://www.thermaltake.com/xaserCase/armor...s/va8000bws.htm When I first saw
this thing i was like wow but when i read what some of the features were i was like *beep* *beep*
/wink.gif' border='0' style='vertical-align:middle' alt='wink.gif' /> the swee...