Hi, I am having a very difficult time trying to create a duplicator. I have everything that includes: 9 Bay Duplicator Tower / 550W PS Acard 2033S Duplicator Controller 7x NEC 3550A DVD Writers 1x 400 GB HD The problem is that I installed everything, but I couldn't get the thing to turn on. Now, I opened it back up, and I saw that from the power/reset button, there were these connectors coming out of it. Now, I have no idea where to put them on my board. I've called support numerous times with people who don't even know their own products. Anyways, the connectors say POWER SW and RESET SW and HDD LED and such. Here is the diagram of the board layout that I have. Please, if you know how and where to connect so that I can get power, lmk. Thanks

Reply

WHAT?... your post title is about dvd duplicator but you talked about your computer power sw...

anyways, if you accidently unplug the power switch cable, etc, then just look on your mother board for PW SW or RESET PW (usually it's around the edge of the motherboard. There should be lables near the power SW pins and stuff.

you can try and use a key or screw driver to jump the power pins to turn your computer on.

or just look for your mother board model and go to the manufacture website and look for the guide book. It should tell you where to connect the connectors to.

Reply