Hy, I was wondering if someone know a solution for my task...I won't bother to look the net for
these if I get no response here. I'm using a Motorola modem my motorola modem that the ISP
gave me.. and in contract they say there's a dynamic address (this only for fiber, for cable
they do not specify) but I only get the same IP address everytime I connect; some clients told that
they were able to get dynamic or other IP addresses after a few months.. anyway I wonder what can I
do to obtain other IP adress or dynamic Ip address. If someone can help me, post he...

I have an linksys wireless router Befw11s4 and my doubt is: it is normal that my router freeze, and
i have to restarted, and why it hapend...

I found this instruction on the net and I'm wondering this actually "speeds up" a dial up
connection? QUOTE Suffering from 52 kbps internet connection? Follow these simple steps and
double your internet connection speed: Connect to the internet Click Start and select control
panel Click Phone and Modem Select Modems tab and then click Properties Click the Advanced tab
and in the extra initialization commands type AT&FX Click Ok and disconnect from the internet
Connect to the internet again and enjoy your 115 kbps connection! Source http...

Ever wanted to surf the net but didn't have a modem on your computer? You don't realy need a
modem to be able to surf the net,you can simply use your cell phone as a modem. HOW? This short
tutorial will teach how to set your phone as a modem connected to your computer/laptop. Frist is
frist.You need a cell phone. 2.It has to have gprs and it must be modem enabled 3.You need a means
of connection from your cell phone to your computer or laptop (inferred,bluetooth or usb cable)
4.You need a dialup connection 5.You need to know and change your proxey settings ...

There are lots of possibilities of using old computers as routers. If computerhas enough RAM (24 -
32 MB) it can be good router. Just few Ethernet cards, Linuxoid software router installed and - it
flies! I tried, it works. ...

Ok so my mum is wanting me to build her a server, fine thats easy. Howver its an ADSL router in
effect with a control panel and a type of logging system! I've seen it done but i want to
know how so i can build this thing! So it needs to have/do the following First it needs to
distribute the adsl over a network (4 different computers) wireless AND WIRED! It has to have a
logging system so th user can see whos been on the net, when and what they were looking at It needs
a type of tracking system, i guess, to remember analyze and monitor programs going thro...

I bought a DLink-524 wireless router, because I am getting another computer and a laptop and I
wanted to share the network. I am running AOL with Broadband DSL which I have had for some time
with no problems. Here is the setups (Like I said I am new to routers) DSL modem > Router >
Computer (As the manual said). There is an ip to connect to to configure the router. I can get
there no problem, and configure it (pppoe). But it doesn't connect. It seems that the only way
I can connect to the internet is directly from the modem to my computer. Am I missing somet...

Does anyone know of a init command that wehnever the phone rings the connection automatically
ceases? and also can you use 2 at the same time? I amd talking about the commands such as at&fx (x2
dialup speeds) can people add more to the list?...

Hello people, This week we've had a power failure arround the entire neighbourhood. Altrough
the power was restored after a few hours my computer has a big problem now, basicly, if I let it
inactive for too long (and sometimes randomly) the router disconnects my PC. When I try to reconnect
to the network after that I get an error message saying something like my PC cant get a network
adress assigned. After reconnecting / disconnecting the network cables and reinstalling the drivers
from my network card it usually starts working again, for a few while. Now I'm af...

I'm finally getting broadband internet at my house after 5 years /biggrin.gif' border='0'
style='vertical-align:middle' alt='biggrin.gif' /> . I need to set up a network, but I don't
know what kind of router/switch to buy. I'm going to have a network printer, satellite dish, and
2 computers hooked up to it. Any ideas what kind to buy? Also, I need a print server for a HP
DeskJet 940. I have no clue where to start on looking. Anyone have a good one, and would like to
share what kind it is?...

I have a WRT54G v5 router and ADSL with PPPoE and I'm experiencing problems with the router
dropping the Default gateway periodically. After browsing this forum for similar problems and
hopefully solutions with no luck on the solution part I decided to chat with Linksys. The guy I
chatted with suggested that I should try changing the router's IP address to 192.168.2.1 instead
of 192.168.50.1 which I had set it to before. In my ears the tip sounded like rubbish, but I gave it
a try and it actually seems to be working. A sufficient amount of time hasn't passe...

I have two computers on the same router. My Comcast advertise a max of 6 mbps. On testing one of my
computers I get 5.5 mbps. On my other computer I only get 4.6 mbps. I am using the on board NICs for
both computers. I got these numbers based on several runs on several days. One motherboard is Asus
P4T533-c with a built-in Intel pro-100 ve NIC. (5.5 mbps) The other motherboard is GA-8IHXP 3.0
with a built-in Realtek RTL8139/810x Family Fast Ethernet NIC. (4.6 mbps) Does anyone have any
idea why one computer is faster than the other? I used nyc.speakeasy.net to test ...

My Linksys BEFW11S4 had recently lost sensitivity to wireless connections and often had drop
packets. Pinging the router replies with "Request timed out". I'm thinking of getting a new
wireless router. I've not used other brands before but thought of changing brands as I'm
afraid another Linksys product might cause the same problem. However, as Linksys is part of Cisco, I
feel a certain sense of sercurity in Linksys products. I'm not sure which brands I should get.
This poll might give alot of help to me and also please leave comments and suggestions so...

i'm needing to set up a DSL modem, to which the computers connect through a router. all the
computers are running winXP. is it possible to configure only certain computers to be allowed to
access the internet, with password prompt? how so, or where can i find a tutorial on this?...