Step 1: Open up document 320x150 Step 2: Chose a render that you use will be using for
your background and as your main image then resize it as well to what ever you wish. Step 3:
Then make enough copies of the render to fill up the background space. Make Sure to deselect the
original so not to mess up. Step 4: Then make a new layer and then go to image and apply
image, next deselect all your copy images or if you want you can delete them cause now its just
nothing but copies of this background. For now Im just going to deselect my images for no....
How To Create A Userbar In Jasc Paint Shop Pro What Are Userbars? Userbars are
rectangular images that are found in most people's signatures. Generally, they depict a
product's logo on the left hand side and some text on the right. Here are some examples:
Many of these can be downloaded for free at sites like userbars.com but in this tut, I'll show
you how to make a simple Paint Shop Pro Addict userbar. This tutorial assumes you know very
little about Paint Shop Pro 9. Once you've opened PSP, you can begin... --------------....
Fireworks Tutorial 2 Creating a graphical signature. The Way Things Work: 1. All steps are
highlighted in blue. 2. When point of reference for an object location within a document it is shown
as (x,y). The (x) stands for the distance from the left edge and the (y) represents the distance
from the top edge. For example, if (0,10) is displayed, then the object will be on the left edge of
the document, 10 pixels down from the top edge. 3. Screenshots of the current progress will be given
when needed. Note that not all of the steps will include a screenshot and some may ha....
Blurb Today, I will show you how to get an outline of a render. I saw in one of Brooks' sig
where he used an outline of zelda, and I was interested in how he did that. Instead of IMing him or
looking on good-tutorials, I learned it myself. Why? That's how I roll. Why? If you're
ever in a situation where you need a good outline of a render, you can follow this simple tutorial
to get one. You can even use the outline to make an icon or whatever. The choice is yours. Keep
reading this, and I'll show you the sig that I used my outline in. How? T....
Beware: This tutorial is NOT fully explained, you need some experience in Photoshop and ImageReady
to FULLY understand this tutorial. Although, you may be able to understand and figure it out on your
own. I know there are about 2 tutorials already in this forums on rollovers but this one is
different, you will use imageready instead of coding it yourself using Javascript or HTML. First,
open up a new document any size you wish. Then, create your link the way you want it to look before
you put your mouse over it. Example Then duplicate your layer(s), (it is best t....
Fireworks Tutorial 1 Creating a fire explosion. Step 1: Firstly, you must create a new
document. I prefer to use 150x285 when creating this image. There is no real reason; apart from the
computer I use to web design is pretty old and slow when dealing with heavy graphics manipulation. I
also use a resolution of 99 pixels per inch. This may not be everyone’s taste, but I find it perfect
for clear images when working with JPG. If you are using GIF slices, then you may want to make it a
bit higher. I always use a white background. This helps with your eyes and judg....
In this tutorial I will show you how to create links in your image. I'm shore there's a lot
of different ways you can do this, but I'll just show you how to do it real easy. 1) After
creating the image you want to add links to in photoshop, make shore the mode is set to RGB Color.
Just go to Image -> Mode -> RGB Color. 2) Go to File -> Jump To -> Adobe ImageReady. Your image
will now load into ImageReady. For this tutorial I will be using this image that I found: I will
make the buttons of this navigation bar into links. 3) Press K to select the slice t....
QUOTE(Johnny @ Jul 6 2005, 07:07 PM) Ah. Simple and sleek. Looks nice. Good job. 158242
1. Open the Render, Put it on your sig over the background(mines black for the tut)And(make
shore that its just the renderas Shown) Sample: 2.Now Click the render's layer and Make a
Layer Mask As Shown Sample: 3.Now press d, Then Get you Brushes Out and select this brush As Shown
Sample: 4.Brush Around the Render so the white pizelated parts are gone As Shown Sample: 5.Now
You're Finished and it should look like this As Shown Sample: If You want to a....
This tutorial will cover three techniques on how to extract pictures that are not on a single solid
color. First of all, you need to find yourself a nice picture. I shall be using this one, which came
with the Appleseed Fan Site Kit: There are several ways we can cut the render of Deunan Knute
out of the picture. Technique 1 This technique is the easiest, but also the most time wasting.
All you need to do is grab the Polygonal Lasso tool, And go around the edges like so:
Tips: When lasso-ing rounded corners or edges, keep your selections small, sh....
Author:Molotov Level: Medium Copyright: Molotov 2005 Ok, well I know you guys have seen this
done were they take a black and white photo and make one object or section of it in color to really
give it that professional look and appeal. Ok lets start off with a nice picture, since i like
motorbikes we will use the picture i used for my signature. After you do that lets duplicate the
layer, then we need to desaturate the duplicated layer by pressing CTRL+SHIFT+U, sorry make you
users i dont know the hot key, so you will have to do it the old fashioned way. Yo....
Topic says it all White background color Step 1 : Make the w x h any canvas size Step 2 : now
click the brush tool and make sure the size is 13 Step 3 : now click a bluish color for the brush
Step 4 :change the default element for the brush to fluid splatter Step 5 :make sure the style of
the brush is burlap Step 6 :now paint all over the background it should look like this Step 7 :
now click filters > blur > radial blur amount:90 quality : 100 Now your done it should look like
this Hope this tutorial shows you how i just mess around and stuff and learn....
Okay, this is a relatively simple tutorial on how to blend a render into your signature in
Photoshop, like this: STEP 1 -- Brush up your background Okay, the first thing you want to do
is to brush your background. Right now I'm using some grunge brushes. For this tutorial,
we're going to use black and white, then color it in later, so on your white background, use a
black brush (or vice versa) to put down your basic brushing. You should end up with something
similar to this, if you're using grunge.
http://www.rendersdesign.com/uploaded_graphics/blender1....
Okay, this is a short and simple tutorial on how to add a render (which is basically another
picture) to your signature in Photoshop, like this: STEP 1 -- Find a render Yes, this is the
most important step. Think about what kind of sig you want to make, and what you want on it. I
usually use game or comic characters on my sigs, so I'm going to be using this render of Vivi, a
Final Fantasy character, that I found on GameRenders.com.
http://rendersdesign.com/uploaded_graphics/render.jpg Tip - Don't go for renders that are
unclear or have hectic backgrounds.....
1: Start a new image 6 by 1.5 inches 2: Press D 3: Select your paint paint fill bucket and fill
your area with black 4: Next render>Lens Flare your lens flare should look like this. 5: Next
you want distort>ripple and do this 6: Next you want to filet>pattern maker. Have your
setting as these and then click generate. 7: Next blur the lines of the images so it looks
like this. 8: Add hue/saturation if you want. Not though that a bright color may make your
blured lines visible.....
Feel free to change any of the things listed. I'm not gonna limit your abilities to this. 1.
Open up Adobe Photoshop (duh) 2. File 3. Press D to reset colors 4. Filter 5. Filter 6. Filter
7. Filter 8. Press Ctrl+F 2 times 9. Press Ctrl+U 10. Check Colorize 11. Move the tabs to
whatever you like 12. Your done! It's really cool for backgrounds for sigs and stuff....
1) make a "gradient bath" just randomly place 5 to 10 thick gradients over your document. 2)
Right after that, go into Craquelure(Filter>Texture>Craquelure) and use these settings(it'll be
the same all through the tutorial) Spacing: 15 Depth: 6 Brightness: 7 3) After using Craquelure,
use Extrude(Filters>Stylize>Extrude) Settings: Squares Size: 30 Depth: 30 4) Then
Emboss(Filters>Stylize>Emboss) Settings: Angle: 135 Height: 45 Amount: 100% 5)Then Craquelure
again(same settings) 6) Make a new layer and fill it with the color of your choice, then set it&....
Looking for creating, sig, background, render, defalts
*RANDOM STUFF*
*SIMILAR VIDEOS*
Searching Video's for creating, sig, background, render, defalts
Express your Opinions, Thoughts or Contribute your information that might help someone here.
Ask your Doubts & Queries to get answers.. "Together, We enlight each other!"
Register FREE for AD-FREE
forum, Create your own topics, Ask Questions, track topics, setup
subscriptions & notifications and Get a Free Website w/ Email and FTP.
