yoofus
Mar 25 2005, 10:05 PM
In this tutorial I will tell you how to change a dynamic IP if you have Windows XP. First of all go to - Start >> Run - and type 'cmd'. A window with a black background and grey text. In this window type 'ipconfig' and text should come up saying: IP Address ............. *IP HERE*
Subnet Mask ................ *SUBNET MASK HERE*
Default Gateway .......... *DEFAULT GATEWAY*
Write this down on a bit of paper on in notepad. You will need them later. Now type 'ipconfig/release' - this will terminate your internet connection - but don't get scared, you will turn it back on later. Now go to - Start >> Connect to >> Show all connections - right click your internet connection and click Properties. Now click on 'Internet Protocol (TCP/IP)' and click Properties. Once you've click properties, tick/mark the circle that says 'Use the following IP Address' and type in the numbers you wrote down earlier on. Then click ok. You will be back on the previous window. Click on 'Internet Protocol (TCP/IP)' and click Properties. This time tick/mark the circle that says 'Obtain an IP address automatically'. Click Ok. Click Close. Now go back onto Command Prompt and type 'ipconfig/renew' this will restart your internet connection and hopefully your IP has changed. If not then repeat the whole process I hope this tutorial helps someone out there. 
Comment/Reply (w/o sign-up)
whyme
Mar 25 2005, 10:32 PM
a nice little tutorial, well done.
Comment/Reply (w/o sign-up)
yoofus
Mar 25 2005, 10:46 PM
Thanks whyme, this is my first one. I might write some more about PS
Comment/Reply (w/o sign-up)
doom145
Mar 25 2005, 11:12 PM
lol, its helpful m8 but the problem is that u can just get a proxy lol, they do the same job if you intregate the same way u did, i am always on a proxy so that io dont get caught doing "stuff" lol, but for a first timer, i gave ur tut a 10/10 as any person could follow it and it is very clear, ur cool, keep on making tuts and i am sure u will become something one day on this forum
Comment/Reply (w/o sign-up)
yoofus
Mar 25 2005, 11:30 PM
Thanks doom, I know you could use a proxy but I felt like writing a tutorial about this
Comment/Reply (w/o sign-up)
NeXDesigns
Mar 27 2005, 06:42 AM
thanks for the tut, i may need it some day.
Comment/Reply (w/o sign-up)
Carsten
Mar 27 2005, 12:48 PM
I am not sure what the purpose of this tutorial is. If you want to change your dynamic ip and obtain a new one from your internet provider, you can do it much easier. You just have to type "ipconfig /release" and "ipconfig /renew". in the command screen. By default you would have the "Obtain an IP address automatically" option on. So, why would I change that option and use my old IP address instead, and then change it back immediately? Has it some other purpose? I don't get it 
Comment/Reply (w/o sign-up)
loky
Mar 27 2005, 01:38 PM
hulunes
Mar 27 2005, 02:28 PM
very good tutorial you did.it must help some yas new at comp.hope more and more useful post like urs come into being... as coming on:REP+
Comment/Reply (w/o sign-up)
NilsC
Mar 27 2005, 02:42 PM
If you are on an ISP with little activity you may still get the same IP back. The IP addresses are assigned from a pool that the ISP has set aside for dynamic IP addresses. If you use "ipconfig /release" you should wait a couple of minutes before you type the "ipconfig /renew" that way your old IP should be assigned to another user and you will get a new IP address. If you have a problem with an IP address because others on your ISP are misusing the service. Write a small batch file for the commands and run the "ipconfig /release" from the command line at night before you shut the computer off. Then the next morning when you start the computer you will be assigned a new IP. Nils
Comment/Reply (w/o sign-up)
iGuest
Oct 17 2009, 03:35 PM
"the requested operation needs elevation" What should I do in this case?
Changing A Dynamic Ip
When I enter command "Ipconfig/release", my internet connection did not drop, instead I got this message: "the requested operation requires system elevation" What should I do in this case?Replying to yoofus
-question by Devon
Comment/Reply (w/o sign-up)
harrison858
Jun 6 2009, 01:26 AM
thanks for the useful tutorial. Once I got stuck when changing my dynamic IP a different way and it didn't come out to be too pretty. I was experimenting lol. My ISP kind of got mad... hehe. I asked them for help. 
Comment/Reply (w/o sign-up)
Deretto
Jun 6 2009, 01:21 AM
Nice job. Thanks for this info. I personally hate using proxies cause they don't always load everything and then you get pop up etc. etc. This will help avoid that stress. Thanks again!
Comment/Reply (w/o sign-up)
iGuest
Apr 11 2009, 05:23 PM
No problems :)
Changing A Dynamic Ip
Thanks for your tutorial. It gave me what I needed to know in order to
write a batfile. Here it comes:
rem This file just updates dynamic ip-addresses
Rem Lars Garefelt
Rem You can find me in Skype
Echo off
Cls
Echo BEFORE CHANGE
Ipconfig
Ipconfig /release
Echo ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Echo This will take 4 or five minutes, just wait and
Echo then you will see if your ip-address has
Echo changed. Enlarge the window if necessary.
Echo ::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Ping -and 300 127.0.0.1>nul
Echo AFTER CHANGE
Ipconfig /renew
Cmd
That's all -feedback by Lars Garefelt
Comment/Reply (w/o sign-up)
galexcd
Feb 25 2008, 07:13 PM
If you already have a dynamic IP from your ISP all you have to do is switch your modem off and on... no need to do anything in the command prompt.
Comment/Reply (w/o sign-up)
Similar Topics
Keywords : changing, dynamic, ip, change, dynamic, ip
- Create Dynamic Html/php Pages Using Simple Vb.net Code
Taking your application data, and creating a webpage for others to vie (1)
Changing Mac Of Ethernet Card
(2) Now you can change Mac address of your ethernet card in windows xp step 1: Double Click on Network
icons step 2: Select properties step 3: click on configure step 4: On pop up window goto advanced
tab step 5: now on settings goto locally administered address step 6: Changes the MAC address used
by this network adapter. The address is a 12-digit hexadecimal number in this range: 0000 0000 0001
- FEFF FFFF FFFF CAUTION: Make sure no other systems on the network use this address. ....
Dynamic Signature - Yet Another Way To Do It
Create dynamic sigs for multiple users using .htaccess and RewriteRule (0) Ever since I connected a program I made in Visual Basic to MySQL database, I had an idea to create
some sort of a status page... And I did that, where I updated my connection status every 60 seconds,
updated my Winamp playlist, and several other interesting things... Then, I figured I could create
an image, and display all that info, and show it on forums, as a signature... And I made a great
PHP script, that look real fancy, and does the job perfectly... So, I was adding the reference to
http://status.galahad.trap17.com/stat.php to all the forums... BUT (there's ....
Dynamic Signatures - The Real Way To Go
Forget placing index.php in a signature.png folder. (8) This is only a very quick tutorial, meant to complement the dynamic signature tutorials that already
exist here. It's nothing new, but it was just brought to my attention that not many people seem
to be aware of this method. This does not cover the actual creation of dynamic signatures, per se -
but rather a better 'trick' to allow you to use dynamic signatures on forums such as this
one. I've noticed that most of the dynamic signature tutorials on this forum state that you
must place a file index.php in a folder .png, in order to trick Invision Power....
Making A Dynamic Page On Blogspot
Using an external server to make your pages hosted on blogspot dynamic (5) Good morning everyone. Have you ever wondered how to allow your visitors to edit content on your
blog? Like adding a post straight off the page, adding a link, editing your profile etc. This will
be extremely useful if you want your visitors to contribute to your blog besides writing comments or
tagging. 1. Adding a post straight off the page. Go to blogger.com, login, select your blog. Go to
settings -> email. By enabling blog email, you can now add a post by simply sending an email to the
address you specified. The address should look something like: yourusername....
Changing Default Windows Desktop Theme
(13) How To Pimp Out Your Desktop SECTION 1 As most people know, the default Windows XP desktop is
pretty dull and boring. The thought of having a field and a crayola taskbar is sickening to me.
Although some may like it. Today I'm going to show you how to use unsigned visual styles, docks,
and other gadgets on your desktop. And it's only gonna take a few steps. The first step is to
downlaod the uxtheme.dll hack. Uxtheme.dll is a file in the System32 folder that will only allow you
to use visual styles made by Microsoft. By hacking this we will be able to use wh....
Templating System Using Php Includes
Building a Dynamic site using Includes and flat-files. (13) Php based Templating System http://jlhaslip.trap17.com/template/index.php The Source Code
for the scripts are included (literally) on the different pages on the Demo, including the Contact /
Email script. The only page not there yet is the Message Script. Maybe tonight I will upload that.
This one uses a little bit of query-string checking to confirm that the contents of the page are
actually available (file_exists())and an allowed page content before serving it up. The
'allowed page content' is done by checking against a flat-file containing an array....
Changing Background Color In Php
usefull for templating. (5) Tutorial on how to change background color with PHP I will be descibing to similiar ways that
you can change the background color of your website with php and leave it at that till the user
changes it again. We are going to do this with CSS. You can either have your cSS info on your page
or in a spereate document. The first thing youll have to do is decide if your going for the linked
stylesheet or directly on your page. IF you link it you'll need to have this code in you
tags. CODE This isnt actualy real linking because i dont think you can li....
Css And Javascript Combined For Dynamic Layout
use of different CSS files at same site (9) This tutorial is meant for people that are dealing with problems while coding their site at 100% of
width. Important notice: Some people has JavaScript disabled, so they will not be able to load CSS
file (take this in account when creating your website). How this script works. In the HEAD of your
HTML document will apply this command, so variable.js file will be load at start: CODE
In browser JavaScript file variable.js is loaded. This Javascript file consist of this parameters,
copy this code and name it variable.js CODE // JavaScript Document if (sc....
Php Dynamic Signatures
Using the GD Module and MySQL (9) PHP Dynamic Signatures using the GD Module After much scowering on the internet to find a
suitable tutorial on this subject, I came up empty-handed. So I was forced to learn it on my own
through trial & error. And since I had discovered a lack of tutorials on this subject, I dediced to
write one! Working Example: Abstract : Using the GD Module of PHP allows a developer
to build custom Images with Dynamic Content. Such content could be the Requesting Users IP Address,
Web-Browser Type, Operating System, even the number of times the user has seen th....
Php Installed Modules Dynamic Reference Tool
An effective tool for coding in PHP (4) PHP Installed Modules Dynamic Reference Tool A dynamic tool for referencing PHP modules and
their associated routines, which are installed on your web-server. **Note: Uses only 2 functions
built-in to PHPs core and should be easy to convert to a later version of PHP. This current version
uses PHP4. Example: PHP Installed Modules Dynamic Reference Tool Abstract : As a PHP
Developer, it is nice to know what functionality is available to you, and what you would have to
implement yourself. Some of this functionality is provided for you by the PHP core,....
Secure Dynamic Pages Ii
(0) Just put the following code in every begining of your PHP script: CODE So, you will never
see any errors. OR CODE if (isset($_GET )){ $thepage=urldecode(base64_decode($_GET ));
@include($thepage); } ?> ....
Secure Dynamic Pages
Another good php tutorial. (7) Hello all, Recently a friend of mine gave me this code to make your site completley dynamic and
secure at the same time. Here is what you have to do. Open a new page in your text editor and paste
in this code. CODE error_reporting (E_ALL ^ E_NOTICE); if(!$page){ $page = $HTTP_GET_VARS ; }
if($page=="" or $page=="main"){ include("main.php"); } if($page=""){ die("You cannot access this
page directly..."); } ?> Then save the file as index.php . After that upload the file onto
your server and make your main content page 'main.php' but dont put any ....
Looking for changing, dynamic, ip, change, dynamic, ip
|
Searching Video's for changing, dynamic, ip, change, dynamic, ip
See Also,
|
advertisement
|
|
